Contact Us TOLL FREE: +1 800-221-6414

Fiberglass Fabrics for Industry

Types of Weave Patterns

A plain weave is the most simple and most commonly used weave pattern. In this type of weave, the warp and filling threads cross alternately. Plain woven fabrics are generally the least pliable, but they are also the most stable.

The leno weave is a locking type weave in which two or more warp threads cross over each other and interlace with one or more filling threads. It is used primarily to prevent shifting of fibers in open weave fabrics

Satin Weave
In a satin weave, the face of the fabric consists almost completely of warp or filling floats produced in the repeat of the weave, which causes one side of the fabric to look different than the other side. There is one filling thread which floats over three or more warp threads, then under one. This is the most drapeable of weave patterns and conforms very easily around most contoured surfaces. Most satin weaves are either four, five, eight, or twelve harness satins and are typically utilized in the composites industry.

A twill weave is a basic weave characterized by a diagonal rib, or twill line. Each end floats over at least two or more consecutive picks enabling a greater number of yarns per unit area than a plain weave, while not losing a great deal of fabric stability. This type of fabric looks different on one side than on the other

Basket Weave
The basket weave is a variation of the plain weave in which two or more warp yarns cross alternately with two or more filling yarns, resembling a plaited basket. This weave is more pliable and stronger than a plain weave, but is looser and therefore, not as stable. The basket weave is typically used in the composites industry.

Carolina Technical Fabrics ® 6859 Renoir Avenue, Baton Rouge, LA 70806
back to top